1 1

Yamaha

Yamaha F50F FT50G F60C FT60D Service Manual 7 files

Yamaha F50F FT50G F60C FT60D Service Manual 7 files

$16.99
$16.99
Sale Sold out
Shipping calculated at checkout.
Machine data plateRef 32645
Brand
Yamaha
Equipment
Tractors
Models covered
Case, JX 95
Format
PDF, searchable, print-ready
Delivery
Instant download after checkout
Language
English

What happens after you pay

  • Download link opens on the order page immediately
  • The same link is emailed to you — re-download any time
  • Open on phone, tablet or PC; print only the pages you need
  • Not sure it covers your serial range? Ask us before you buy
🏷️ Basic Information
Identification
Make:
Yamaha
Model:
F50F, FT50G, F60C, FT60D
Model Variants:
F50F (50 hp), FT50G (50 hp), F60C (60 hp), FT60D (60 hp)
Production Years:
2000-2011 (approximate)
👋 Introduction
Market Position
Target Audience:
Technicians, DIY owners, and marine mechanics
Market Segment:
Small outboard motors for fishing boats, tenders, and small craft
Competitive Advantage
Key Advantage:
Comprehensive 7-file set covering multiple related models with detailed procedures
Key Features
Engine Type:
4-stroke, 3-cylinder, SOHC
Displacement:
996 cc
Fuel System:
Electronic fuel injection (EFI)
Starting System:
Electric start
📋 Manual Details
Coverage
Coverage Areas:
Complete tear-down and rebuild, troubleshooting, wiring diagrams, maintenance
Manual Characteristics
Page Count:
Varies per file, total over 1000 pages across 7 files
Manual Type:
Service and repair manual
Language:
English
Format:
PDF
Delivery Method:
Instant download
📖 Manual Coverage
Systems Covered
General Information:
Identification, specifications, and special tools
Maintenance:
Periodic checks, lubrication, and adjustments
Engine Mechanical:
Cylinder head, valve train, pistons, crankshaft, and bearings
Cooling System:
Water pump, thermostat, and cooling passages
Fuel System:
Fuel pump, injectors, throttle body, and fuel vapor separator
Electrical System:
Starter motor, alternator, ignition system, and wiring diagrams
Powerhead:
Complete engine disassembly and reassembly
Lower Unit:
Gearcase, driveshaft, water pump, and shift mechanism
Tilting and Trim:
Power trim and tilt system
Steering and Remote Control:
Cable and hydraulic steering, remote control boxes
Procedures Included
Disassembly and Assembly:
Step-by-step instructions for engine and lower unit
Overhaul:
Complete engine overhaul procedures
Diagnosis and Testing:
Troubleshooting charts and testing procedures
Adjustment and Tune-up:
Valve clearance, idle speed, and carburetor or EFI adjustments
Electrical Wiring Diagrams:
Color-coded wiring schematics
Technical Depth
Level of Detail:
Service-level manual with exploded diagrams and torque specifications
Special Tools:
References to Yamaha special tools and alternatives
Parts Information
Parts Identification:
Exploded parts diagrams with part numbers
Part Numbers:
OEM part numbers for ordering
📊 Manual Specifications
File Format
File Type:
PDF
Compatibility:
PC, Mac, tablets, smartphones, and e-readers
Requirements:
PDF reader software (e.g., Adobe Reader, Preview)
Searchability:
Searchable text for quick navigation
Physical Characteristics
Print Quality:
High-resolution images and diagrams for clear printing
Binding Type:
Digital (no physical binding)
Paper Type:
N/A (digital download; print on standard letter or A4 paper)
⚙️ Engine Specifications
Primary Engine
Engine Type:
4-stroke, 3-cylinder, SOHC
Displacement:
996 cc
Bore x Stroke:
74.0 mm x 72.0 mm (approx.)
Compression Ratio:
10.0:1 (approx.)
Performance
Maximum Output:
50 hp at 5500 rpm (F50F/FT50G), 60 hp at 5600 rpm (F60C/FT60D)
Full Throttle Range:
5000-6000 rpm
Idle Speed:
700-800 rpm (in neutral)
Fuel Consumption:
N/A - varies with load and conditions
Fuel System
Induction System:
Electronic fuel injection (EFI)
Fuel Type:
Unleaded gasoline (87 octane minimum)
Fuel Delivery:
High-pressure fuel pump and injectors
🔧 Transmission
Standard Transmission
Gear Ratio:
2.15:1 (F50F/FT50G), 1.85:1 (F60C/FT60D) (approx.)
Shift Type:
Forward-neutral-reverse
Optional Transmission
Power Trim and Tilt:
Standard on tilt models, optional on others
Features
Propeller:
Aluminum or stainless steel, various pitches
Cooling:
Water-cooled
📐 Dimensions
Exterior
Shaft Length:
520 mm (20 in) or 635 mm (25 in) depending on model
Engine Weight:
Approximately 111-115 kg (245-254 lb) depending on model and electric start
Weights
Curb Weight:
Approximately 111-115 kg (245-254 lb) for engine only
🛡️ Safety Features
Ratings and Certification
Safety Certification:
Complies with US EPA and CARB emission standards
Crash Test Information:
N/A - outboard motors do not undergo crash testing
Active Safety Features
Engine Shut-off Lanyard:
Equipped on all models
Overheat Warning:
Audio and visual alarm
Low Oil Pressure Warning:
Audio and visual alarm
Passive Safety Features
Corrosion Protection:
Multi-layer anti-corrosion coating and sacrificial anodes
Water Separator Filter:
Standard equipment to prevent water contamination
💡 Technology Features
Infotainment
Tachometer and Gauges:
Optional digital and analog gauges available
Engine Management and Assistance
Engine Control Unit:
Digital ECU manages ignition and fuel injection
Self-Diagnostics:
Fault code retrieval for troubleshooting
Trim Indicator:
Optional gauge displays trim angle
🔧 Maintenance
Service Intervals
Break-in Service:
After first 10 hours or 3 months
Regular Service:
Every 100 hours or annually, whichever comes first
Timing Belt or Chain:
No replacement interval required (chain driven)
Fluid Specifications
Engine Oil Type:
Yamalube 4-Stroke Outboard Oil 10W-30, API SL or higher
Gearcase Oil Type:
Yamalube Marine Gearcase Oil, SAE 80W-90 GL-4
Fuel Requirement:
Regular unleaded (87 octane minimum)
Coolant:
N/A - water-cooled
Common Issues
Water Pump Impeller:
Replace every 2-3 years or if overheating occurs
Fuel Filter:
Replace annually or if fuel flow restrictions
Corrosion on Anodes:
Inspect and replace when eroded more than 50%
📚 Vehicle History
Brand Heritage
Manufacturer:
Yamaha Motor Co., Ltd.
Heritage:
Yamaha is a leading outboard motor manufacturer with a reputation for reliability and performance
Model Evolution
Lineage:
Part of Yamaha's F50/F60 family, evolving from earlier carbureted models to EFI
Variants:
F50F/FT50G and F60C/FT60D share similar architecture with different power outputs
Production Location
Country of Manufacture:
Japan or USA (varies by serial number range)
🏆 Awards & Recognition
Industry Recognition
Reliability Awards:
These models have received consumer satisfaction awards in various industry reviews
Specific Awards:
N/A - not documented for these exact models
Consumer Ratings
Consumer Reviews:
Generally favorable for fuel efficiency and quiet operation

Delivery & file format

This is a digital PDF download, not a printed book. After payment the download link appears on your order confirmation page and is emailed to the address you entered. Files open in any PDF reader on phone, tablet or computer and can be printed.

Check the serial range before you buy

Manufacturers change procedures and part numbers by serial-number break. If your data plate shows a serial prefix that is not listed above, contact us with the model and serial number and we will confirm coverage before you order.

View full details
  • Instant download PDF link on your order page and by email right after payment.
  • Secure checkout Encrypted Shopify checkout — we never see your card.
  • Print-ready PDF Searchable text, print the pages you need for the workshop.
  • Phone, tablet, PC Open it in the cab, the workshop or the office.