1 1

Bush Hog

BUSH HOG TD 1500 1700 Operation Maintenance Owners Manual

BUSH HOG TD 1500 1700 Operation Maintenance Owners Manual

$16.99
$16.99
Sale Sold out
Shipping calculated at checkout.
Machine data plateRef 23893
Brand
Bush Hog
Equipment
Lawnmowers
Models covered
Finishing / Grooming Mowers, TD 1500 1700
Format
PDF, searchable, print-ready
Delivery
Instant download after checkout
Language
English

What happens after you pay

  • Download link opens on the order page immediately
  • The same link is emailed to you — re-download any time
  • Open on phone, tablet or PC; print only the pages you need
  • Not sure it covers your serial range? Ask us before you buy
🏷️ Basic Information
Identification
Make:
Bush Hog
Model:
TD 1500 / TD 1700
Product Type:
Tri-Deck Finishing Mower
Model Variant:
TD 1500 (150 in cutting width); TD 1700 (170 in cutting width)
Production Years Covered:
N/A - not specified in the supplied description
Generation:
N/A
👋 Introduction
Market Position
Target Audience:
Farm and ranch operators, turf managers, and grounds crews running compact and utility tractors
Typical Tractor Requirement:
25 HP minimum for the TD 1500; 30 HP minimum for the TD 1700
Competitive Advantage
Deck Design:
Three independent floating decks follow ground contours for a uniform cut across wide swaths
Turf Protection:
Anti-scalp rollers reduce scalping and turf damage on rolling ground
Cutting Overlap:
Blade overlap between decks produces a consistent, streak-free cut
Drive System:
Belt drive to deck spindles keeps maintenance straightforward and absorbs shock loads
Key Features
PTO Drive:
540 RPM tractor PTO powered, no independent engine
Wide Cut Range:
150 in to 170 in cutting width depending on model
Folding Transport:
Decks fold hydraulically to roughly 90 in transport width
Terrain Suitability:
Flat to gently undulating ground
📋 Manual Details
Documentation
Manual Type:
Operator's Manual
Manual Focus:
Operation and Maintenance
Language:
English
Format:
PDF Download
Delivery Method:
Instant download
Binding:
Digital
Page Count:
N/A - page count not stated in the supplied description
Document Use
Intended Use:
Setup, safe operation, adjustment, lubrication, and routine service of the TD 1500 and TD 1700
Searchable:
PDF format allows keyword search of specifications and procedures
📖 Manual Coverage
Systems Covered
Cutting Decks:
Three independent floating decks, deck shell, gauge wheels and anti-scalp rollers
Spindle Assemblies:
Deck spindles, bearings, and blade mounting
Blade System:
Blade removal, sharpening, balancing, and replacement
Belt Drive:
Deck spindle belt routing, tensioning, and replacement
PTO Driveline:
PTO shaft, universal joints, slip clutch or shear protection, and shielding
Gearbox:
Gearbox operation, oil level checks, and lubrication
Hitch and Frame:
Three-point hitch mounting, main frame, and deck lift linkage
Hydraulic Folding:
Deck fold and unfold circuits where so equipped
Wheels and Tires:
Wheel hardware, tires, and wheel bearing service
Procedures Included
Setup:
Initial assembly checks and pre-operation inspection steps
Adjustments:
Cutting height, belt tension, and deck leveling adjustments
Lubrication:
Lubrication points at deck spindles, PTO shaft, and hitch points
Service:
Scheduled maintenance and component replacement procedures
Troubleshooting:
Symptom-based diagnosis of cut quality, vibration, and drive faults
Storage:
End-of-season preparation, cleaning, and storage steps
Technical Depth and Parts
Technical Depth:
Component identification, torque values where given, fluid and tension specifications, and step-by-step instructions
Parts Information:
Part names and locations for wear components such as blades, belts, spindles, and rollers
Illustrations:
Diagrams and figures support the operation and maintenance procedures
📊 Manual Specifications
File & Compatibility
File Format:
PDF (searchable, bookmarked, zoomable)
Compatibility:
Windows, macOS, Linux, iOS, and Android — any device with a PDF reader
Requirements:
A PDF reader application (e.g. Adobe Acrobat Reader, free)
Searchability:
Fully text searchable for fast lookup of any topic
Print & Binding
Print Quality:
High-resolution digital pages, printable at full clarity
Binding Type:
N/A — digital download, no physical binding
Paper Type:
N/A — digital download, no physical paper
⚙️ Engine Specifications
Power Source
Engine Type:
PTO Driven (tractor required)
Power Take-Off Speed:
540 RPM
Tractor Requirements
Minimum Tractor HP:
25 HP for the TD 1500
Minimum Tractor HP:
30 HP for the TD 1700
Hydraulics:
Tractor remote hydraulics required for deck folding where so equipped
Fuel System:
N/A - implements run from the tractor PTO; no integral fuel system
🔧 Transmission
Drive Train
Type:
N/A - PTO driven implement, no integral transmission
Drive System:
Belt drive to deck spindles
PTO Shaft:
540 RPM driveline from tractor to implement gearbox
Gears:
N/A - no gear selection on the implement
Features
Shock Protection:
Slip clutch or shear protection in the PTO driveline, as equipped
Ground Following:
Independent floating decks maintain cut height over uneven ground
Transport:
Hydraulic deck folding reduces width for transport
📐 Dimensions
Exterior
Cutting Width:
150 inches (TD 1500)
Cutting Width:
170 inches (TD 1700)
Transport Width:
Approximately 90 inches, decks folded
Wheelbase:
N/A - towed/three-point mounted implement; wheelbase not applicable
Weights
Weight:
Approximately 1350 lbs (TD 1500)
Weight:
Approximately 1500 lbs (TD 1700)
🛡️ Safety Features
Ratings
Crash Test Rating:
N/A - non-road implement, no crash test rating applies
Active Features
PTO Shielding:
Driveline shields protect against rotating shaft contact
Blade Shielding:
Deck skirts and discharge shielding contain thrown material
Anti-Scalp Rollers:
Rollers limit scalping and reduce loss of control from deck gouging
Passive Features
Transport Locks:
Deck fold cylinders and transport position hold decks for travel
Warning Decals:
Safety decals identify pinch, entanglement, and thrown-object hazards
Slow-Moving Vehicle Marking:
SMV emblem placement for road transport
💡 Technology Features
Infotainment
Audio System:
N/A - implement has no onboard audio or infotainment
Driver Assistance
Driver Assistance:
N/A - implement is controlled from the tractor; no electronic driver assistance
Deck Float:
Independent floating decks act as a mechanical ground-following system
Cut Quality Control:
Blade overlap and anti-scalp rollers maintain consistent cut height
🔧 Maintenance
Routine Service
Lubrication Points:
Deck spindles, PTO shaft, and hitch points
Blade Replacement Interval:
As needed, based on usage and material cut
Belt Tension Adjustment:
As needed for optimal performance
Service Interval:
Perform pre-operation checks each use and lubricate at the intervals given in the manual
Gearbox Oil Type:
Recommended gearbox oil (refer to manual for the specific type)
Gearbox Oil Capacity:
Refer to manual for the specific gearbox fill level
Known Issues and Wear Items
Blades:
Dull, bent, or unbalanced blades cause poor cut and vibration
Drive Belts:
Belts wear and stretch; slipping belts reduce blade speed
Spindle Bearings:
Worn spindle bearings produce noise, heat, and play
PTO Shaft:
Universal joints and slip clutch require periodic lubrication and inspection
Gauge Wheels and Rollers:
Anti-scalp rollers and wheel bearings wear with heavy use
📚 Vehicle History
Brand Heritage
Manufacturer:
Bush Hog
Heritage:
Bush Hog is a long-established manufacturer of rotary cutters and tractor-mounted implements
Model Evolution
Model Evolution:
The TD 1500 and TD 1700 tri-deck finishing mowers extend the line to wider cutting widths for large turf and pasture areas
Production
Production Location:
N/A - not specified in the supplied description
🏆 Awards & Recognition
Recognition
Model or Era Awards:
N/A - no specific awards documented for this model in the supplied description
Brand Standing:
Bush Hog is widely recognized as a leading name in tractor-mounted cutting equipment

Delivery & file format

This is a digital PDF download, not a printed book. After payment the download link appears on your order confirmation page and is emailed to the address you entered. Files open in any PDF reader on phone, tablet or computer and can be printed.

Check the serial range before you buy

Manufacturers change procedures and part numbers by serial-number break. If your data plate shows a serial prefix that is not listed above, contact us with the model and serial number and we will confirm coverage before you order.

View full details
  • Instant download PDF link on your order page and by email right after payment.
  • Secure checkout Encrypted Shopify checkout — we never see your card.
  • Print-ready PDF Searchable text, print the pages you need for the workshop.
  • Phone, tablet, PC Open it in the cab, the workshop or the office.