1 1

Allis Chalmers

Allis Chalmers Tractor Model D-19 D-19 Diesel Factory

Allis Chalmers Tractor Model D-19 D-19 Diesel Factory

$16.99
$16.99
Sale Sold out
Shipping calculated at checkout.
Machine data plateRef 101599
Brand
Allis Chalmers
Equipment
Tractors
Models covered
C
Format
PDF, searchable, print-ready
Delivery
Instant download after checkout
Language
English

What happens after you pay

  • Download link opens on the order page immediately
  • The same link is emailed to you — re-download any time
  • Open on phone, tablet or PC; print only the pages you need
  • Not sure it covers your serial range? Ask us before you buy
🏷️ Basic Information
Identification
Make:
Allis Chalmers
Model:
D-19
Model Variant:
D-19 Diesel
Production Years:
1961-1963 (gas version); Diesel variant introduced 1962
👋 Introduction
Market Position
Target Audience:
Farmers and agricultural contractors requiring a row-crop tractor with high power output
Era:
Early 1960s
Competitive Analysis
Advantages:
Power Director transmission offered eight forward speeds; rugged construction and advanced hydraulics for its time
Key Features
Engine:
Allis Chalmers diesel engine with high compression and fuel efficiency
Transmission:
Power Director with shift on-the-go under load
📋 Manual Details
Coverage
Models Covered:
Allis Chalmers D-19 and D-19 Diesel
Specifications
Page Count:
Approx. 1000 pages
Manual Type:
Complete service repair manual with detailed instructions
Language:
English
Format:
PDF (digital download)
Delivery Method:
Instant download upon purchase
📖 Manual Coverage
Systems Covered
Engine:
Complete disassembly, inspection, and overhaul procedures for Diesel engine
Fuel System:
Injection pump, injectors, fuel lines, and fuel tank
Cooling System:
Radiator, water pump, thermostat, and hoses
Lubrication System:
Oil pump, oil filter, and lubrication points
Transmission:
Power Director transmission repair, clutch adjustment, and gear shifting
Final Drive:
Axle shafts, bearings, and seals
Brakes:
Service and parking brakes
Steering:
Manual steering gear adjustment
Hydraulic System:
Pumps, valves, cylinders, and three-point hitch
Electrical System:
Starter, alternator, wiring, lights, and gauges
Power Take-Off (PTO):
Independent PTO clutch and shaft
Sheet Metal and Body:
Repair of hood, fenders, and grille
Wheels and Tires:
Front and rear tire sizes, wheel removal and installation
Cab and Controls:
If equipped, cab repairs and control linkage
Procedures Included
Routine Maintenance:
Scheduled services, fluid checks, and filters
Troubleshooting:
Diagnostic charts for engine, electrical, and hydraulic problems
Disassembly and Assembly:
Step-by-step procedures with clear instructions
Specifications:
Torque values, clearances, and wear limits
Repair and Overhaul:
Major components overhaul, including engine and transmission
Technical Depth
Level:
Comprehensive factory-level detail suitable for professional mechanics
Illustrations:
Many diagrams, drawings, and exploded views
Parts Information
Parts Diagrams:
Exploded views with part numbers
Part Numbers:
OEM part numbers for ordering replacements
📊 Manual Specifications
File Format
File Type:
PDF
Compatibility:
Works on Windows, Mac, Linux, iOS, Android, and any PDF reader
Requirements:
A PDF reader is required; no special software needed
Searchability:
Text searchable for quick indexing of terms
Print Quality
Quality:
Clear high-resolution pages suitable for printing
Binding
Binding Type:
Digital (no physical binding)
Paper Type:
N/A - digital document
⚙️ Engine Specifications
Primary Engine
Manufacturer:
Allis Chalmers
Type:
Four-cylinder diesel
Displacement:
Approximately 302 cubic inches (4.9 liters)
Power:
Approximately 64 horsepower at the PTO
Torque:
Not specified in manual summary
Aspiration:
Naturally aspirated
Cylinders:
4
Bore and Stroke:
4.25 x 5.25 inches (108 x 133 mm)
Compression Ratio:
16.2:1
Performance
Rated RPM:
1800
Fuel Consumption:
Approximately 0.4 pounds per horsepower-hour
Fuel System
Type:
Direct injection
Fuel Pump:
Inline injection pump
Injection Nozzles:
Pintle type
Fuel Tank Capacity:
Approximately 25 gallons (95 liters)
🔧 Transmission
Standard Transmission
Type:
Power Director with manual shift
Speeds:
8 forward and 2 reverse
Shifting:
Power shift under load in each range
Optional Transmission
N/A:
No alternative transmission available
Features
Clutch:
Dry disc
Rear PTO:
Independent
📐 Dimensions
Exterior
Wheelbase:
Approximately 86 inches (218 cm)
Length:
Approximately 135 inches (343 cm)
Width:
Adjustable rear tread from 60 to 84 inches
Height:
Approximately 62 inches (to hood)
Weights
Curb Weight:
Approximately 7,400 pounds (3,360 kg)
🛡️ Safety Features
Ratings
Crash Test Information:
N/A - tractor not subject to automotive crash testing
Active Features
Brakes:
Differential brake pedals for improved steering control
Rollover Protection Structure (ROPS):
Optional factory ROPS
Passive Features
Operator Presence:
Not equipped
Seat Belt:
Not standard
💡 Technology Features
Infotainment
Audio System:
None
Driver Assistance
Power Steering:
Optional
Hydraulics:
Power operated three-point hitch and remote valves
🔧 Maintenance
Service Intervals
Engine Oil Change:
Every 100 hours
Oil Filter Change:
Every 100 hours
Transmission Fluid Check:
Every 300 hours
Hydraulic Oil Change:
Every 1000 hours or annually
Air Filter Cleaning:
As needed, check daily in dusty conditions
Fluid Specifications
Engine Oil:
SAE 30 (API class CD) for diesel engines
Transmission and Hydraulic Fluid:
Allis Chalmers Power Fluid 821
Coolant:
Ethylene glycol based antifreeze with corrosion inhibitor
Known Issues
Common Wear Items:
Injection pump seals, brake discs, hydraulic o-rings
Common Problem:
Power Director clutch slipping due to wear or misadjustment
📚 Vehicle History
Brand Heritage
Manufacturer:
Allis Chalmers Manufacturing Company
Founded:
1901 (after merger)
Model Evolution
Predecessor:
D-17
Successor:
One-Ninety series
Production Period:
1961-1963
Production Location
Plant:
West Allis, Wisconsin, USA
🏆 Awards & Recognition
Recognitions
Industry Awards:
No specific awards found for this model

Delivery & file format

This is a digital PDF download, not a printed book. After payment the download link appears on your order confirmation page and is emailed to the address you entered. Files open in any PDF reader on phone, tablet or computer and can be printed.

Check the serial range before you buy

Manufacturers change procedures and part numbers by serial-number break. If your data plate shows a serial prefix that is not listed above, contact us with the model and serial number and we will confirm coverage before you order.

View full details
  • Instant download PDF link on your order page and by email right after payment.
  • Secure checkout Encrypted Shopify checkout — we never see your card.
  • Print-ready PDF Searchable text, print the pages you need for the workshop.
  • Phone, tablet, PC Open it in the cab, the workshop or the office.