This comprehensive manual provides detailed instructions and troubleshooting information for the Auto Guide System found on Fendt 700 and 800 Vario Com III tractors. The manual covers a wide range of topics, including system diagnosis and repair, configuration and adjustment, and operational procedures. The manual starts with a section dedicated to understanding and interpreting Auto Guide system error codes, which can help identify and resolve common issues. It delves into how to adjust for steering errors through automatic offset functionality, and guides users through retrieving detailed system information. Specific tests for evaluating satellite reception and the Auto Guide steering system are included. A substantial section focuses on calibration and adjustment procedures, including steps for aligning the steering angle sensor, adjusting the Auto Guide control valve, and correcting for roll errors. The manual also provides detailed instructions for commissioning a tractor with OmniStar correction signals, setting up an ISO-BUS connection, and using the Auto Guide system. It covers various aspects of configuring and operating the system, including toggling the standby mode, performing functional tests, and understanding the working principles of the Auto Guide system. Users can find instructions on extracting serial numbers and authorization codes using both the A059 Auto Guide terminal and the Auto Guide Service Tool. The manual explains the different Auto Guide correction signals available, including OmniStar VBS, OmniStar HP, and WAAS/EGNOS. It includes guidance on ordering and activating OmniStar correction signals, as well as upgrading from the standard OmniStar VBS to the more precise OmniStar HP system. For those utilizing a base station, the manual provides a comprehensive checklist for installation and commissioning. It covers ordering and setting up the base station, acquiring a radio license, and installing the radio module. Step-by-step instructions on configuring the radio frequency and channel on both the tractor and the base station are included. A section dedicated to software updates and programming addresses downloading software from AGCOnet and updating both the A059 Auto Guide terminal and the A058 Auto Guide TopDock. The manual concludes with a detailed schematic of the Auto Guide system, instructions for performing a hydraulic system check, and component-specific descriptions and test procedures for various parts, including ECUs, receivers, terminals, sensors, switches, and control valves.

The Fendt 700 and 800 Vario Com III tractor series, renowned for their advanced technology and precision farming capabilities, feature the Auto Guide System, a sophisticated automated guidance system. This system significantly enhances operational efficiency and accuracy by utilizing GPS and satellite technology to steer the tractor along pre-programmed paths. The Auto Guide System is equipped with a comprehensive suite of components, including the A059 Auto Guide Terminal, A058 Auto Guide TopDock, and a dedicated ECU for control and processing. The system supports various correction signals, such as OmniStar VBS, OmniStar HP, WAAS/EGNOS, and even a base station option for enhanced accuracy, allowing farmers to tailor the system to their specific needs and budget. The Auto Guide System simplifies and streamlines tractor operation, reducing operator fatigue and increasing productivity. This system enables farmers to achieve precise seed placement, fertilizer application, and other critical tasks, leading to optimized crop yields and minimized input costs. The comprehensive "Prüfanleitung Auto-Guide System" manual provides detailed instructions on system operation, troubleshooting, and maintenance. The manual includes a step-by-step guide for system setup and configuration, as well as detailed diagnostic procedures for identifying and resolving potential issues. This thorough documentation empowers users to confidently operate and maintain the Auto Guide System, ensuring maximum performance and reliability. The Fendt 700 and 800 Vario Com III tractor series, equipped with the Auto Guide System, are a testament to Fendt's commitment to innovation and precision agriculture, offering farmers unparalleled control and efficiency in their operations.