{"product_id":"still-fork-truck-r70-60-r70-70-r70-80-series-r7090-r7091-r7092-operating-and-maintenance-instructions","title":"Still Fork Truck R70-60 R70-70 R70-80 Series: R7090 R7091 R7092 Operating and Maintenance Instructions","description":"Original Illustrated Factory Operating and Maintenance Instructions for Still Fork Truck R70-60 R70-70, R70-80 Series.\r\n\r\nOriginal factory manuals for Still Forklift Trucks, contains high quality images, circuit diagrams and instructions to help you to operate and repair your truck. All Manuals Printable and contains Searchable Text\r\n\r\nCovered models:\r\nR7090\r\nR7091\r\nR7092\r\n\r\nFormat: PDF, 275 Pages\r\nLanguage: English\r\n\r\nContents:\r\n\r\n1. Foreword\r\n Your truck\r\n General\r\n CE labelling\r\n EC declaration of conformity in accordance with Machinery Directive\r\n Information about documentation\r\n Documentation scope\r\n Issue date and currentness of manual\r\n Copyright and trademark rights\r\n Explanation of information symbols used\r\n Explanation of the cross-references\r\n Definition of directions\r\n Typical graphics\r\n For the love of the environment\r\n Packaging\r\n Disposal of components and batteries\r\n2. Introduction\r\n Use of truck\r\n Proper usage\r\n Proper use during towing\r\n Impermissible use\r\n Place of use\r\n Using working platforms\r\n Residual risk\r\n Residual dangers, residual risks\r\n Special risks associated with using the truck and attachments\r\n Overview of hazards and countermeasures\r\n Danger to employees\r\n3. Safety\r\n Definition of terms used for responsible persons\r\n Operating company\r\n Specialist\r\n Drivers\r\n Essentials for safe operation\r\n Insurance cover on company premises\r\n Changes and retrofitting\r\n Changes to the overhead guard and roof loads\r\n Warning regarding non-original parts\r\n Damage, defects and misuse of safety systems\r\n Tyres\r\n Medical equipment\r\n Exercise caution when handling gas springs and accumulators\r\n Safety inspections\r\n Regular safety inspection of the truck\r\n Checking the diesel engine emissions\r\n Trucks with particle filters\r\n Insulation testing\r\n Safety regulations for handling consumables\r\n Permissible consumables\r\n Oils\r\n Diesel fuel\r\n Hydraulic fluid\r\n Brake fluid\r\n Battery acid\r\n Coolant\r\n Disposal of consumables\r\n Emissions\r\n4. Overviews\r\n Truck\r\n General view of driver's compartment\r\n Operating devices and display elements\r\n Controls on console\r\n Identification points\r\n Location of identification points\r\n Nameplate\r\n StVZO (Road Traffic Licensing Regulations) information\r\n Production number\r\n Equipment\r\n Standard equipment and variants\r\n Attachments\r\n Accessory overview\r\n5. Operation\r\n Checks and operations prior to commissioning\r\n Visual inspections\r\n Opening the motor hood\r\n Engine preheating\r\n Checking the engine oil level\r\n Cleaning the dust valve\r\n Checking the condition of the wheels and tyres\r\n Filling the washer system\r\n Checking coolant level\r\n Adjusting the MSG 65\/MSG 75 driver's seat\r\n Adjusting the steering column\r\n Start-up\r\n Climbing in and out of the truck\r\n Shelves and cup holders\r\n Switching on the key switch\r\n Starting the engine\r\n Operating the signal horn\r\n Seat belt\r\n Using the Easybelt seat belt\r\n Checking the brake system for correct function\r\n Checking the steering system for correct function\r\n Adjusting the traction program\r\n Driving\r\n Safety regulations when driving\r\n Procedure if truck tips over\r\n Emergency hammer\r\n Driveways\r\n Driving (single-pedal operation with multiple-lever version)\r\n Driving (single-pedal operation on single lever version)\r\n Driving (dual-pedal operation)\r\n Operating the service brake\r\n Actuating the parking brake\r\n Steering\r\n Lifting\r\n Lifting system variants\r\n Lift mast versions\r\n Malfunctions during lifting mode\r\n Lifting system operating devices\r\n Hydraulic blocking function\r\n Lifting system, multi-lever operation\r\n Lifting system, single-lever operation\r\n Changing the fork arms\r\n Fork extension (variant)\r\n Operation with reversible fork arms (variant)\r\n Working underload\r\n Safety regulations when handing loads\r\n Before taking up load\r\n Picking up loads\r\n Danger area\r\n Transporting pallets\r\n Transport of swinging loads\r\n Load pick up\r\n Transporting loads\r\n Setting down loads\r\n Driving on ascending and descending slopes\r\n Driving on lifts\r\n Driving on loading bridges\r\n Working with attachments\r\n Fitting attachments\r\n Depressurising connections for attachments\r\n Setting the auxiliary hydraulics\r\n General instructions for controlling attachments\r\n Controlling attachments using multi-lever operation\r\n Controlling attachments using single-lever operation\r\n Clamp locking mechanism (variant)\r\n Taking up a load using attachments\r\n Operation of additional equipment\r\n Switching lighting on and off\r\n Switching the rotating beacon on and off\r\n Switching the hazard warning system on and off\r\n Switching direction indicators on and off\r\n Rear working spotlights\r\n Operating the windscreen wiper\/washer\r\n Heater\r\n FleetManager (variant)\r\n Accident recorder (variant)\r\n Trailer operation\r\n Towed load\r\n Coupling on a trailer\r\n Automatic tow coupling\r\n Towing trailers\r\n Operation of console\r\n Console displays\r\n Setting and changing the displays\r\n Fault messages\r\n Diagram\r\n SAFETY BELT message\r\n SEAT SWITCH message\r\n AIR FILTER message\r\n SERVICE BRAKE message\r\n MOTOR BRUSHES message\r\n COOLANT TEMP, message\r\n MOT\/GEN TEMP message\r\n OIL PRESSURE message\r\n COOLANT LEVEL message\r\n HYDR. OIL FILTER message\r\n SERVICE REQUIRED message\r\n EXH. GAS PURIFIER message\r\n Operation in special operating situations\r\n Transport\r\n Towing\r\n Lifting by crane\r\n Jump starting\r\n Filling fuel\r\n Filling up with diesel fuel\r\n Shut-down\r\n Parking the truck securely\r\n Use wheel chocks\r\n Shutting down and storing the truck\r\n Recommissioning after storage\r\n6. Maintenance\r\n General maintenance information\r\n Personnel qualifications\r\n Information regarding the performance of maintenance\r\n Intervals for maintenance and inspection\r\n Ordering spare parts and wearing parts\r\n Quality and quantity of the required operating materials\r\n Diesel fuel\r\n Maintenance data table\r\n Safety regulations for maintenance\r\n General information\r\n Working on the hydraulic equipment\r\n Working on the electrical equipment\r\n Safety devices\r\n Set values\r\n Lifting and jacking up\r\n Working at the front of the truck\r\n Cleaning\r\n Cleaning the truck\r\n Cleaning the electrical system\r\n Cleaning the load chains\r\n Cleaning the windows\r\n After washing the truck\r\n Maintenance after first 50 operating hours\r\n  Maintenance during the break-in period\r\n  Maintenance as required\r\n  Cleaning the radiator, checking for leaks\r\n  Topping up the coolant and checking the concentration of the coolant additive\r\n  Draining water from the fuel filter\r\n  Changing the airfilter insert\r\n  Servicing the ETB particle filter\r\n  Servicing Eberspacher particle filters\r\n  Cleaning the alternator and engine ventilation filter\r\n  Lubricating the joints and controls\r\n  Maintaining the seat belt\r\n  Checking the driver's seat\r\n  Servicing wheels and tyres\r\n  Servicing the battery\r\n  Replacing the fuses\r\n  Servicing the hydraulic system\r\n  Brake fluid level\r\n  Lubricating the mast bearings\r\n  Lubricate the tilt cylinder bearings\r\n 500-hour maintenance\r\n  Other tasks\r\n  Checking the condition and tension of the V-ribbed belt\r\n  Check the coolant hoses\r\n  Checking the exhaust gas system\r\n  Checking the brake system for correct function and leaks\r\n  Check fork arms\r\n  Checking lift cylinders and connections for leaks\r\n  Lubricating the lift mast and roller track\r\n  Checking the start-up prevention\r\n 1000-hour maintenance\r\n  Work that must also be carried out\r\n  Changing the primary fuel filter\r\n  Renewing the fuel filter\r\n  Cleaning the condensate ETB particulate filter\r\n  Changing the fuel filter for Eberspacher particle filter systems\r\n  Checking the reversible fork arms\r\n 1500-hour maintenance\r\n  Work that must also be carried out\r\n 3000-hour maintenance\r\n  Work that must also be carried out\r\n 4000-hour maintenance\r\n  Work that must also be carried out\r\n7. Technical data\r\n Dimensions\r\n VDI datasheet\r\n Wheels and tyres\r\n Fuse assignment\r\n8. Circuit diagrams\r\n Hydraulics\r\n Hydraulic circuit diagram\r\n Electrical equipment\r\n Legend for circuit diagrams","brand":"Eberspacher","offers":[{"title":"Default Title","offer_id":44583856701591,"sku":"156801","price":16.99,"currency_code":"HKD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/1788\/0471\/files\/156801-still-fork-truck-r70-60-r70-70-r70-80-series-r7090-r7091-r7092-operating-and-maintenance-instructions_e9c924b2-a8bb-4c48-92fa-f6b255cbd88c.jpg?v=1725590744","url":"https:\/\/agriculturemanual.com\/products\/still-fork-truck-r70-60-r70-70-r70-80-series-r7090-r7091-r7092-operating-and-maintenance-instructions","provider":"agriculturemanual.com","version":"1.0","type":"link"}